Description générale
L’équipement en fonctionnement principal de n’importe quel bouteur est une lame. Sa structure en acier renforcée avec un profil courbé permet d’accomplir efficacement une large gamme de buts énormément compliqués par rapport aux travaux routiers, BTP et autres domains.
L’aplanissement du sol, le décapage du sol, le curage de la neige ou des détritus, l’aide à l’ exploitation des carriers sont des types de travaux où la charge principale est appliquée à une lame de bouteur. C’est pour cette raison, il est important que ce type d’attache soit fabriqué de matériaux de haute qualité.
Pour travailler sur le sol, une lame de bouteur est equipé de lèvres coupantes résistantes à l'usure en bas et sur le côtés. Quand elles sont usées les lèvres coupantes sont remplacées par de nouveaux lèvres coupantes. D’habitude les lèvres coupantes installées en bas sont bilatérales i.e. dès que elle est usée la lèvre peut être renversée pour continuer à fonctionner. Les lèvres coupantes plus solides sont souvent unilatérales mais leur structure est épaissi afin d’améliorer la résistance à l'usure. Les lames sont faits de l’acier allié de haute qualité pour améliorer la longévité et résistance aux charges.
Les bouteurs à chenilles à toutes fins sont équipés de lames multifonctionnelles penchées et droites. Ces dernières peuvent etre droites, sphériques, hémisphériques à condition que les limites soient couvertes par des “boucliers” lateraux afin de garder le sol en transportant. Les lames sont équipés de treillis ou parois en haut pour assurer la protection des vérins hydrauliques et du radiateur.
LA GAMME DE PRODUITS FABRIQUES PAR LA “PROFESSIONAL” INCLUT LES TYPES SUIVANTS DES LAMES DE BOUTEUR:
- lames droites
- lames standard – appliquées pour une large gamme de travaux,
- lames sphériques – appliquées pour déplacer un volume considérable de terres légères à longue distance,
- lames hémisphériques – ces lames remplissent les fonctions d’une lame droite et sphérique,
- lames tournantes – appliquées pour transporter de la terre transversalement, pour remblayer, déblayer un terrain contre neige, detritus ou plantes,
- lames d’angles de basculement et biais à ajuster – attachées aux bouteurs légers et appliquées pour accomplir de petits travaux d’aplanissement et façonnage.
Des niveleuses automatrices, tracteurs ou chargeuses peuvent etre équipés de lames de bouteur afin d’augmenter le fonctionnement.
La Compagnie “Professional” fabrique tous les types principaux des lames et des essoucheurs pour l’équipement spécial de la Russie et l’équipement étranger tel que: Komatsu, Caterpiller, Shantui, Volvo, Dressta, CHETRA, CHTZ, DST, etc.
La durée de fabrication de lames est de 5 à 15 jours ouvrables.
Types of blades “Professional” cam manufacture upon your request.
Straight blades include straight, spherical and semispherical ones. The end faces of these blades are closed by two side wings to reduce loss of soil during transportation. Front plate ends with upper canopy welded with an angle to the front plate. The canopy prevents the soil from pouring over the upper edge of the blade and improves formation of soil dragging prism.
 |
Standard blade (S) – is applied to develop a wide range of nonfrozen soils inclusive of light rock ones. |
 |
Spherical blade (U) – is especially effective for moving of considerable volumes of light soils to long distances. It is made of three sections: a central one and two side ones. The latter are installed with an angle of up to 250 to the central section. Blade’s bended shape provides soil movement to its center, thus ensuring minimum losses during transportation. |
 |
Semispherical blade (SU) – combines ability of a straight blade to penetrate deeply into the soil and ability of a spherical blade to move big volumes of materials due to short side sections mounted to the angle of 250 to the central section. |
U, SU and S blades are equipped with a tilt brace (hydraulic cylinder and coupling bolt) that ensure good penetration into firm soils. In case there are two tilt cylinders available, the driver can change tilt angles and cutting angle right from the cabin, during the machine’s travel by getting adjusted to the dynamic soil conditions.
 |
Angle blade (A) – is applied for side-to-side transportation of soil, for trenches backfill, for arrangement of embankments and for clearing of snow, rubbish, greenery. The blade can rotate around a frame joint roundtrip. In terms of shape this is a straight blade without side wings, extended to its width and shortened to its height. |
 |
Variable Pitch Power Angle and Tilt blade (PAT) – are universal blades that can change its transverse and lengthwise angles, fastened hingedly to a flat topped C-frame.
In terms of shape this blade is straight, and its dimensions are similar, the only thing missing is side wings. It is applied for minor grading and planning operations done by low draught class dozers.
|
The low area of a blade’s front bended plate is equipped with removable cutting edges: two or three central ones (pos. 3; 4) and two end ones (pos. 1; 2), which are shorter. This type of dozer blades complex structure allows immediate exchange of the blade parts and their individual replacement in case they are worn out.
Central blades are normally double sided. Central blades are fastened to the plate by fastening square headed bolts that prevent rotation when fastened with nuts. The bolt’s conical head is put to a counterbored hole of the blade in such a way that it is flushed and does not make any obstacles when soil moves along the blade.
When sharp cutting edge is worn out, it is dismounted from the blade, rotated 1800 and is fastened again. The cutting edge is operated with its second sharp edge until it is worn out too.
Side cutting edges are thickened in order to improve their wear resistance. Side cutting edge is prevented from displacement by two lines of holes where bolts and nuts are fastened. They are single sided, i. e. they have one cutting edge, but they are more solid than the main ones.